EXHAUST

EXHAUST MANIFOLD FOR EVO123 AND GSR









Part Numbers:
----------------------
Description:Full Stainless steel with thicknees 2.5mm with wastegate pipe for external wastegate.Come with Flange Suitable Fit TD05L 16G,18G,20G,TD04HL.

Application:Suitable for Mitsubishi Lancer GSR,Mivec Bolt On Turbo,Mitsubishi EVO123

____________________________________________________________
TURBOSMARTS ULTRA GATE 38 WASTEGATE

Part Numbers:
Blue: TS-0501-1010
Black: TS-0501-1011
Description: 38mm external wastegate. Small and lightweight, the Ultra-Gate 38 provides high-end features and build quality at an entry-level price.
Application: Suitable for all turbocharged vehicles with an external wastegate turbo system. Street and racing applications. Flanges suit 1.50" outside diameter pipe.
Supplied with: 7psi spring (fitted), valve seat, 2 stainless steel gaskets, mounting bolts and 2 1/8NPT Vacumm fittings.
____________________________________________________________
EXTRACTOR



SKUNK2 Extractor Honda B-Series


_______________________________________________________________

TURBO

A turbo is a gas compressor used for forced-induction of an internal combustion engine. Like supercharger, the purpose of a turbocharger is to increase the density of air entering the engine to create more power. However, a turbocharger differs in that the compressor is powered by a turbine driven by the engine's own exhaust gases.

MODEL:-
-TD05
-T3/T4 A/R50
-GT35 A/R70
-T70R A/R70
-T70R A/R84

Turbo Oil Inlet Hose


WORKS Boost Controller

_______________________________________________________________

EXHAUST MANIFOLD


4G93 TD05 with Wastegate pipe --- MISUBISHI EVO 7-9


NISSAN SR20 Top T3/Lower T3 --- NISSAN RB25 Top/Lower T3


MAZDA FD3S RX7 with Wastegate pipe --- HONDA B16/B18


NISSAN VQ35 350z --- NISSAN RB26 Top/Lower T4


PERODUA Myvi RHF4 --- DAIHATSU L2 Turbo




Banana 4G93 GSR Thailand




4G9X Banana


TONNKA GSR
_______________________________________________________________

WASTEGATE

What is Wastegate?
A trap door-like device on the exhaust side of turbocharger that limits the amount of boost a turbo can produce. The Wastegate consist of a spring loaded diaphragm. A vacuum hose connects the diaphragm to the intake manifold. When boost pressure starts to exceed the rating of the Wastegate, the diaphragm pulls open the bypass flap in the turbo housing. This allows some of the exhaust to go around the turbo impeller which slows it down. A Wastegate can be checked by applying pressure to the hose with a hand-held pump. If it doesn't move at the specified pressure, the diaphragm probably ruptured and the Wategate need to be replace.

TIAL Wastegate




- Product by TIALsport USA
- Size available:-
TIAL MV-S = 38mm 1.0 Bar
TIAL F38 = 38mm 1.0/0.7 Bar
TIAL V44 = 44mm
TIAL F46 = 46mm
TIAL F60 = 60mm

TIAL Type WASTEGATE
- Made in Taiwan
- TIAL Style - 38mm
- MVS Style - 38mm
- Spec: 0.8 Bar - 1.0 Bar
Package include 2 pair of vacuum bolt, 4pcs allen key screw and nut, 2pcs gasket, 2pcs Wastegate adapter.

TURBOSMART Wastegate

-Description:
Smaller, lighter and better in every key performance area than its predecessor, the new Ultra-Gate38 provides high-end features and builds quality at an entry-level price.
-Application:
Suitable for all turbocharged vehicles with an external wastegate turbo system. Street and racing applications.
-Supplied With:
2 gaskets, 2 NPT fittings, valve seat,mounting bolts and a 7psi spring.

MINES V44 Wastegate


MINES F38 Wastegate (38mm)

-Description:
MINES F38 Wastegate are race proven units that offer unsurpassed craftsmanship, reliability and functionality for a diverse range of applications. Each Mine’s wastegate is constructed with a stailess steel valve, a die-cast mount base and valve seat, a fulley sealed shaft and a high temperature resistant diaphragm. Mine’s has the appropriate wastegate for every application and performance level. Each wastegate type offers several different spring rates for various boost pressure levels to suit your turbo systems perfectly.
-Application:
Suitable for all turbocharged vehicles with an external wastegate turbo system. Street and racing applications.
Supplied With:
2 gaskets, 2 NPT fittings, valve seat,mounting bolts and a 1bar spring.

H-Type WASTEGATE


-Description:
The H40 wastegate wastegates are commonly used for regulating boost levels more precisely than internal wastegates in high power applications, where high boost levels can be achieved.
-Application:
Suitable for all turbocharged vehicles with an external wastegate turbo system. Street and racing applications.
-Supplied with:
2 gaskets, 2 NPT fittings, valve seat,mounting bolts and a 1.2bar spring

TIAL Style Wastegate Diaphragm


HKS Wastegate Diaphragm


WASTEGATE Customise Spring Bar

Spring Bar:-
** 0.3 Bar
** 0.4 Bar
** 0.5 Bar
** 0.7 Bar
** 0.8 Bar
_______________________________________________________________

AROSPEED Carbon Exhaust


_______________________________________________________________

THERMO BANDAGE

ZERONE Thermo Bandage


AROSPEED Thermo Bandage

Template by : kendhin x-template.blogspot.com | Car Wordpress Theme | Car Forums